MV Agusta 175
   HOME

TheInfoList



OR:

The MV Agusta 175 were a series of motorcycles produced by the
Italian Italian(s) may refer to: * Anything of, from, or related to the people of Italy over the centuries ** Italians, an ethnic group or simply a citizen of the Italian Republic or Italian Kingdom ** Italian language, a Romance language *** Regional Ita ...
manufacturer
MV Agusta MV Agusta (, full name: MV AGUSTA Motor S.p.A., original name: Meccanica Verghera Agusta or MV) is a motorcycle manufacturer founded by Count Domenico Agusta on 19 January 1945 as one of the branches of the Agusta aircraft company near Milan in ...
from 1953 to 1960. The series included touring, GT (Gran Turismo),
sports Sport pertains to any form of competitive physical activity or game that aims to use, maintain, or improve physical ability and skills while providing enjoyment to participants and, in some cases, entertainment to spectators. Sports can, th ...
and supersports models. There were also two racing variants. Because of the shape of the
petrol tank A fuel tank (also called a petrol tank or gas tank) is a safe container for flammable fluids. Though any storage tank for fuel may be so called, the term is typically applied to part of an engine system in which the fuel is stored and propel ...
, the sports and supersport models became known as the ''Disco Volante'' (Flying Saucer). The series was MV's best seller.


Development and Technology

The MV Agusta 175 was launched at the
EICMA EICMA (''Esposizione Internazionale Ciclo Motociclo e Accessori''), or the Milan Motorcycle Shows is an annual trade show in Milan, Italy featuring motorcycles A motorcycle (motorbike, bike, or trike (if three-wheeled)) is a two or three-w ...
(Milan Motorcycle Show) in 1952, with production starting in 1953. For MV Agusta, this motorcycle was a milestone. It was their first production machine with a
four-stroke engine A four-stroke (also four-cycle) engine is an internal combustion (IC) engine in which the piston completes four separate strokes while turning the crankshaft. A stroke refers to the full travel of the piston along the cylinder, in either directio ...
. The
unit construction : ''For the vehicle design where the vehicle's skin is used as a load-bearing element, see Monocoque.'' Unit construction is the design of larger motorcycles where the engine and gearbox components share a single casing. This sometimes includes ...
single-cylinder engine A single-cylinder engine, sometimes called a thumper, is a piston engine with one cylinder. This engine is often used for motorcycles, motor scooters, go-karts, all-terrain vehicles, radio-controlled vehicles, portable tools and garden machinery ...
was designed with an
overhead camshaft An overhead camshaft (OHC) engine is a piston engine where the camshaft is located in the cylinder head above the combustion chamber. This contrasts with earlier overhead valve engines (OHV), where the camshaft is located below the combustion c ...
for high performance. The chain-driven
camshaft A camshaft is a shaft that contains a row of pointed cams, in order to convert rotational motion to reciprocating motion. Camshafts are used in piston engines (to operate the intake and exhaust valves), mechanically controlled ignition systems ...
operated the
valves A valve is a device or natural object that regulates, directs or controls the flow of a fluid (gases, liquids, fluidized solids, or slurries) by opening, closing, or partially obstructing various passageways. Valves are technically fittings ...
via
rocker arm In the context of an internal combustion engine, a rocker arm is a valvetrain component that typically transfers the motion of a pushrod to the corresponding intake/exhaust valve. Rocker arms in automobiles are typically made from stamped steel ...
s, which were closed by hairpin valve springs. The engine was inclined forward at 10° and manufactured in
alloy An alloy is a mixture of chemical elements of which at least one is a metal. Unlike chemical compounds with metallic bases, an alloy will retain all the properties of a metal in the resulting material, such as electrical conductivity, ductility, ...
and a bore and
stroke A stroke is a medical condition in which poor blood flow to the brain causes cell death. There are two main types of stroke: ischemic, due to lack of blood flow, and hemorrhagic, due to bleeding. Both cause parts of the brain to stop functionin ...
of 59.5 mm × 62 mm. The cycle parts featured an advanced duplex
frame A frame is often a structural system that supports other components of a physical construction and/or steel frame that limits the construction's extent. Frame and FRAME may also refer to: Physical objects In building construction *Framing (con ...
that used the engine as a
stressed member A motorcycle frame is a motorcycle's core structure. It supports the engine, provides a location for the steering and rear suspension, and supports the rider and any passenger or luggage. Also attached to the frame are the fuel tank and battery. A ...
,
telescopic fork A telescopic fork is a form of motorcycle front suspension whose use is so common that it is virtually universal. The telescopic fork uses fork tubes and sliders which contain the springs and dampers. The main advantages of the telescopic fork ...
s, a
swinging arm A swingarm, or "swinging arm" (UK), originally known as a swing fork or pivoted fork, is a single or double sided mechanical device which attaches the rear wheel of a motorcycle to its body, allowing it to pivot vertically. The main component of ...
and full-width alloy hubs. The machine was initially available as a
tourer Touring car and tourer are both terms for open cars (i.e. cars without a fixed roof). "Touring car" is a style of open car built in the United States which seats four or more people. The style was popular from the early 1900s to the 1930s. Th ...
, the 175 CST/CSTL, which produced at 5600 rpm. A
sports Sport pertains to any form of competitive physical activity or game that aims to use, maintain, or improve physical ability and skills while providing enjoyment to participants and, in some cases, entertainment to spectators. Sports can, th ...
model, the 175 CS, was soon introduced. This model featured a larger
carburetor A carburetor (also spelled carburettor) is a device used by an internal combustion engine to control and mix air and fuel entering the engine. The primary method of adding fuel to the intake air is through the venturi tube in the main meteri ...
and produced at 6700 rpm, which put the machine above similar models from other manufacturers. The 15 bhp supersport model, the MV Agusta 175 CSS, was introduced at the 1954 Milan Show and, and, unlike the touring and sports versions, was fitted with Earles forks; it was priced at 280,000 lire. A
pushrod A valvetrain or valve train is a mechanical system that controls the operation of the intake and exhaust valves in an internal combustion engine. The intake valves control the flow of air/fuel mixture (or air alone for direct-injected engines) ...
version of the engine was introduced in 1957. It was hoped that a simpler, cheaper model, albeit with less power, would appeal to a larger audience. Pushrod models had an AB suffix to the model designation.


Model variants


175 CST

The ''175 CST'' was one of the original models produced. This touring model had a frame of a double loop design using tubes for the front sections and pressed steel members at the real. Suspension was telescopic forks at the front and a swinging arm at the rear and the wheels were 17" diameter. Separate saddles were used for the rider and passenger. The 175 cc OHC engine produced at 5600 rpm, giving a top speed of 60 mph (100kmh).


175 CSTL

The ''175 CSTL'', also known as the ''Turismo Lusso'', was another touring model, but had larger, 19" wheels than the CST and a "long seat" (dualseat) fitted rather than separate saddles.


175 CS

The sports model ''175 CS'' was introduced in 1953. It featured lower handlebars and a more sporty riding position. The engine featured a larger 22 mm carburettor and the engine produced at 6700 rpm, giving a top speed. About 4,500 examples of this model were made. The Italian motorcycle fans connected the shape of the
fuel tank A fuel tank (also called a petrol tank or gas tank) is a safe container for flammable fluids. Though any storage tank for fuel may be so called, the term is typically applied to part of an engine system in which the fuel is stored and propel ...
with a "vehicle from another galaxy", which gave the MV Agusta 175 CS its nickname, ''Disco Volante'' (Flying Saucer), which was also adopted in the model history of the manufacturer. The CS model was also produced under licence in Spain by Avello.


175 CS 57

An updated version on the 175 CS was introduced in 1957. The ''175 CS 57'' featured
dynamo file:DynamoElectricMachinesEndViewPartlySection USP284110.png, "Dynamo Electric Machine" (end view, partly section, ) A dynamo is an electrical generator that creates direct current using a commutator (electric), commutator. Dynamos were the f ...
ignition and a revised exhaust.


175 CSS

In July 1954, the supersport model ''175 CSS'' was introduced. The engine was further turned from the CS model, including higher compression ratio and a larger carburettor, to produce @ 8,800 rpm. Cycle parts were the same as the CS model, except it was fitted with Earles forks. The petrol tank of the CS was retained, so this model was also known as the Disco Volante. This is the rarest model of the series, only around 500 of this model was produced.


175 CSGT

The 175 CSGT, also known as the ''Turismo Monoalbero'', was only manufactured in 1957. It was an upscale GT (Gran Turismo) version of the CS model. Although the engine was from the CS, the
cylinder head In an internal combustion engine, the cylinder head (often abbreviated to simply "head") sits above the cylinders and forms the roof of the combustion chamber. In sidevalve engines, the head is a simple sheet of metal; whereas in more modern ov ...
was from the CSTL model, which reduced power.


AB models

Introduced in 1957, it was hoped that these simpler, cheaper models would appeal to a larger audience. Various trim levels were offered: Economica, Turismo, America and America Lusso. All used a
pushrod A valvetrain or valve train is a mechanical system that controls the operation of the intake and exhaust valves in an internal combustion engine. The intake valves control the flow of air/fuel mixture (or air alone for direct-injected engines) ...
version of the engine, which produced @ 5,200 rpm, giving a top speed of 60 mph (100kmh).


235 Tevere

An enlarged version of the 175 AB was introduced in 1959. The pushrod engine's bore was increased to 69 mm to give a capacity of 232 cc. Except for the colour of the petrol tank, visual differences between the 175 and 235 models were minimal. Sales were slow as most buyers wanting a larger machine than 175 preferred the "full" 250 cc of the 250 Raid. Production stopped in 1961. A variant was also manufactured under licence in Spain by Avello, where it was marketed as the ''235 Deva''.


Race versions


175 CSS-5V

The 175 cc ''Formula Sport Derivata'' race series was very popular in Italy. MV Agusta designed the 175 CSS-5V for this race series using the production engine. The ''Squalo'' (shark), as it was generally known, had a lighter frame based on that used on the works racers, larger brakes, a
magneto A magneto is an electrical generator that uses permanent magnets to produce periodic pulses of alternating current. Unlike a dynamo, a magneto does not contain a commutator to produce direct current. It is categorized as a form of alternator, ...
, Earles forks and a five-speed gearbox. It was sold as an over the counter racer and riders such as Bob Keeler,
Derek Minter Derek Minter (27 April 1932 – 2 January 2015) was an English Grand Prix motorcycle and short-circuit road racer. Born in Ickham, Kent, with education starting in nearby Littlebourne, Walker, Mick. ''Derek Minter, King of Brands'', 2008, p.8 ...
and
Mike Hailwood Stanley Michael Bailey Hailwood, (2 April 1940 – 23 March 1981) was a British professional motorcycle racer and racing driver. He is regarded by many as one of the greatest racers of all time. He competed in the Grand Prix motorcycle ...
used the Squalo in national competitions. Hailwood won his first ever race on one of these machines bored out to 196 cc in a 200 cc class race at Oulton Park in 1957. Around 200 of the model were manufactured between 1954 and 1957. A street version of the Squalo was offered fitted with
headlights A headlamp is a lamp attached to the front of a vehicle to illuminate the road ahead. Headlamps are also often called headlights, but in the most precise usage, ''headlamp'' is the term for the device itself and ''headlight'' is the term for ...
and
muffler A muffler (North American and Australian English) or silencer (British English) is a device for reducing the noise emitted by the exhaust of an internal combustion engine—especially a noise-deadening device forming part of the exhaust sys ...
s.


175 Bialbero

The 175 Bialbero was an enlarged version of the successful
DOHC An overhead camshaft (OHC) engine is a piston engine where the camshaft is located in the cylinder head above the combustion chamber. This contrasts with earlier overhead valve engines (OHV), where the camshaft is located below the combustion c ...
125 Bialbero works racer. The bore was increased to 64 mm to give a capacity of 174 cc and had a power output of 25 bhp at 11,500 rpm. The machine was produced in response to
Moto Morini Moto Morini is an Italian motorcycle manufacturer founded by Alfonso Morini in Bologna, in 1937. Earlier, Morini had also manufactured motorcycles together with Mario Mazzetti under the name MM. Moto Morini came under Cagiva control in 1987, t ...
and Mondial entering the 175 cc class with their racing machines. The machine won 12 races in total, the first being by
Carlo Ubbiali Carlo Ubbiali (22 September 19292 June 2020) was an Italian nine-time World Champion motorcycle road racer. In the 1950s, he was a dominant force in the smaller classes of Grand Prix motorcycle racing, winning six 125cc and three 250cc world tit ...
at the Circuit of Perugia on 22 August 1954.
Umberto Masetti Umberto Masetti (4 May 1926 - 28 May 2006) was an Italian two-time World Champion Grand Prix motorcycle road racer. In 1950, he became the first Italian to win the 500cc World Championship. Career Masetti was born in Borgo delle Rose, in th ...
won the 175 cc Italian Championship in 1955 on a Bialbero. The machine was placed first and second in the 1957 Motogiro (Motorcycle Tour of Italy).


Technical data


Gallery


References


Bibliography

* * {{MV Agusta 175 Motorcycles introduced in 1953 Single-cylinder motorcycles